Review on 🔧 Enhance Engine Performance with K&N PF-1200 Fuel Filter by Phillip Reed

My car Integra GS 2000. I had to post this because I ran into a small problem. This filter looks like OEM. The installation is quite easy. Remember to depressurize the fuel line (open the gas cap, remove the fuel pump fuse and turn the ignition key, it goes out). I won't run the rest of the setup as there are dozens of YouTube videos. Here's the problem with this filter on the Integra: The u-groove that holds the fuel line neck is TOO small! I'm against it. It will not sit flush. Here's my advice. Make sure you plug the hole in the filter VERY tightly so nothing gets inside. Use a metal file and file the inside of the U-groove. I measured the neck of the fuel line, it's about 8mm. Once you have completed this the fuel line will be seated snugly in the groove. I forgot to mention that I also used masking tape to catch the metal shavings. The fuel filter I took out was an 18 year old fuel filter. Hooray! I would definitely buy this filter again, but next time I might file the u-groove first before installing it.