Review on 🎯 Enhance Your Game with the Viper by GLD Products 37-0108 Laser Throw/Toe Line Marker: Multi, one Size by Josh Cooper

And most importantly, yes, you can attach it to the bottom edge of the dart cabinet. See photos. 2 screws (small ones supplied with the kit). I drew holes with a pencil to hold it in place, used a hand drill with a pen to pre-drill very small holes. Then he turned it carefully. The hardest part is adjusting the head to hit the spot exactly. In my case, 3 different measurements from the front of the dartboard to the front of the shoe tread were required, plus some subtraction and addition. Then subtract the indicated distance from the rules and put a small board on the floor. The harder part. laser setup. This is held in place by friction, so you'll have to adjust it manually by moving the round head. Small adjustments can be more difficult, and adjusting the angle so the line is parallel to the wall when looking back at the line is like reversing a car with a trailer. But you will make it. Look at the photos how it looks during the day. Gift? I would say that the owner of the dartboard should decide for himself if he wants it. If possible, an ideal dart mat with a raised edge. But if you install yours in the entryway (the only spot in my house with enough space) so that you only have to mark while playing, it's perfect. The only open question is how long it will last on a set of 4 AA batteries. The time will show.