Review on 🚣 Enhance Your Outdoor Adventures with ECOTRIC J-Bar Universal Kayak Canoe Top Mount Carrier Roof Rack - 2 Pairs | Perfect for Boat, SUV, Van, Car | Extended 3-Month Warranty Offer! by Bob Souza

Availability Read for help building. The assembly instructions were a parts list, an exploded view with parts list numbers, and the parts didn't match everything. After much deliberation, we installed the trunk in our car. We have everything but a nut and bolt to make everything perfect. He entered sideways so as not to tighten it to the end. 1 Slide the rubber piece over the small rods with the large holes facing up. 2 Attach the large poles to the small poles. 3 Insert two long bolts into the two middle holes. You may have to screw them in. 4 Place four short bolts in the corners and push or screw them all the way in. 5 Turn it over and put the metal square and then the washers on the corner bolts, then put the nut on. 6 Tighten the nut while pushing the screw. The bolt rotates a little and then dips deeper into the rubber part. Eventually the square part of the bolt sinks into the square part of the metal bars. The bolt stops turning and the nut finally tightens 7 Now to the car. Put on the crossbar and while holding the metal bracket, put on the washer and knob. You need to tighten them in the square holes as before. Now it must be done. Round bolts should be rubber so nothing but rubber touches the kayaks. Hope that helps.