Review on 🚗 Enhance Driving Safety with RaxTDM Non-Slip Performance Foot Pedal Pads for BMW X1 E39 E46 E87 E84 E90 E91 E92 by Rich Rickenbaugh

It was cheap and looked good! Fits well on my e92! The only problem is that the finish on the gas pedal wasn't perfect. This required a drill and a drill that could go through metal. In fact, the installation took me a long time. Holes should be pretty accurate. I deviated slightly from one of the pedals and couldn't get the 4th screw in. Washers are thin. The accelerator pedal mounting bolts need to be cut. If not, you'll never get into the WOT. If you don't care, then skip it. I used a piece of paper slipped in between the screw to see if it slides freely when the throttle is fully depressed. That took forever. I didn't have an angle grinder with me, so I used airplane sheet metal. They worked, but it took forever. With additional screws and nuts. The aluminum isn't that thick, but you need a thin one to be able to bend it to shape it because it won't fit perfectly. the accelerator pedal is a few mm higher than the brake pedal. I wish the dead pedal was a little longer to cover the height of the plastic dead pedal, but that's no big deal. Props to those who installed this in under an hour! Looks great. It still impresses me every time I open the driver's door. On review I'm not sure where the rubber broke. Months have passed and they are looking good. I don't move my foot much on the pedals. Never had slippage issues with this product or the standard equipment. I did it for aesthetic reasons 😀. By the way, the delivery took forever. I think 6-8 weeks.