Review on 🖨️ Blu 1Kg Precise Resolution Printing: Achieving Precision and Clarity in Printing by Dean Love

The addition to other resins gives you the benefit of added strength without the sticky and difficult pressure when building parts for use in a mechanical environment have to use heaters and 100% of this resin, but for miniatures a 50% mix of this and another resin (I use elegoo grey) produces amazing prints. OLD REVIEW before mixing: This resin is not "easy to use" and despite the description REQUIRES A HEATER. I shake my resin, store at home at 78 degrees Fahrenheit and print fine for months (150+ minis). Didn't work on the same way the props were printed but the model printed/didn't print as the resin was so sticky/thick sheets from many sources including ones I was told worked for them (they had a heater). Two prints were successful I sat for 3 hours with the blow dryer on high power on and off every 15 minutes and the baby sat there with the impressions.One time I had to replace my FEP because the resin was sticking to it so firmly that when I cleaned the foil ripped the resin itself is amazing to type on and would be my go-to resin going forward if it wasn't so awful to work with te components components in the printer and makes the SC anyway TERRIBLE smelly tar much more corrosive. I suggest you switch to something that works at room temperature.