Review on 🖥️ ESGAMING RGB ATX Mid-Tower PC Case: High Airflow ARGB Lighting, Tempered Glass Panels, USB 3.0 by Robert Berio

Great case and very easy to fit. There are many cable holders and places to hide cables. The glass on the front has 4 thumbscrews that need to be removed to access the interior. I thought it was a swing door but I'm sure I just got it wrong. It's not that heavy, but it's still inconvenient to loosen all 4 screws when I have to get in. The only downside I have is the fans. The chassis comes with 4 fans preinstalled, 3 in the front and 1 near the rear I/O. The three front fans were fine, but using the 240mm radiator on top required removing the rear fan. The problem, at least for me, was two things. The front I/O connectors (power, USB, audio, and reset) are located about 2 inches behind the front of the case, pushing the heatsink and fans back slightly. That's not a problem, except that the included fans are thick, at least thicker. than those in my previous case. In order for my nice new CPU cooler to fit, I had to remove it, leaving me with just 3 front fans and my heatsink. Luckily my computer is in my house. right next to the vent so it only runs about 60*C under load, and not having a fourth fan is fine. If you're using a traditional CPU cooler, this probably isn't an issue, but if you are if you have one Using 240mm wheel just be aware that you may need to throw away the fan or at least buy a thinner one for the rear.