Review on Premium Marble PLA Filament for 3D Printing by Vulkankraft by Lawrence Reuter

Every 3D printing enthusiast tries new filament to make sure it doesn't tangle, holds up well and gives great results. I believe Vulkankraft's Premium PLA Marble Filament hits the mark in all of these categories! It really is an incredibly easy thread to work with, which is always a plus. The coil came well packaged with good tightness. Once I removed the plastic shrink wrap, I noticed that there was an extra "saran" wrap around the thread, further increasing my overall confidence in their quality control department. After a few small test runs, it was time to print something. it will really benefit from the improved look and feel of PLA marble. We had to go statue! That's why I chose Moai. My print settings were as follows: Printer: PRUSA MK3S+Nozzle: Brass 0.4mm Resolution: 0.2mm Printer for placing marble threads. I know that the manufacturer recommends 210°C as the upper range for printing this filament, but I found 215°C to be slightly better at gluing smooth layers in my initial tests compared to 210°C, plus it's generally the de- facto standard or "golden point". PLA. Adhesion to the bed was strong at every pressure. Layering was excellent, with barely visible layer ridges on all of my prints. There was no tension; Simply beautiful print for print! Absolutely tangle free reel with excellent consistency and quality as evidenced by the photos and video I have included with my review. Of course I am very happy with the results of Vulkankraft PLA premium marble. I will be looking at other listings and would highly recommend this brand and PLA marble!