Review on 🔥 Safety Energy-saving Heater: Portable Electric Fan Heater for Room, Office & Desktop - Warms Air Efficiently at 110v, Blue by Scott Carlile

This works fantastic for my QIDI S-Box 3D printer which has a lot of space behind the resin tank. I mean I bought a 110v plug in temperature controller here (https://www.amazon.com/gp/product/B098K55L6Z/ref=ppx_yo_dt_b_asin_title_o02_s01?ie=UTF8&psc=1) and this mini heater. I routed the heater power cord from the cooking chamber to the temperature controller. Then I hung this heater on the back wall with a magnet. I also routed the thermostat probe from the temperature controller into the chamber. I connected the mini heater to the extension cord and set the temperature accordingly. That works great. I typically use Siraya Tech resins which require a heated chamber. It will take about 20-25 minutes for the chamber to fully heat up to the set temperature of 86F (or 30C) and then you are done. This isn't the fastest heater, but it's stable and holds the temperature very well. But I couldn't without the temperature controller. This heater is either on or off and has no internal thermostat. So know that.