Review on Robot vacuum cleaner Roborock S7 Global, black by Barbara Polak ᠌

It can only be controlled using a mobile application over WiFi and the Internet. Since both the vacuum itself and the mobile application connect to the same IP address that is part of the subnet of the Chinese corporation Kingsoft Corp., it appears that the control is carried out via a server located in China. Those. You won't be able to use the program to control the vacuum cleaner if there isn't WiFi, Internet, or connectivity to the Chinese server for some reason. Long hair is coiled on both the side brush and the main brush for cleaning. It can only be removed by hand. Scissors can be used to cut the side brush. If there is a lot of winding, you must first loosen the side brush from its screw before removing it. The side bearings must be removed together with the center brush, which must be pulled out (it snaps). With the aid of a laser lidar, curtains are regarded as an obstruction without physical contact. Those. It is preferable to lift them over the lidar when cleaning. He doesn't notice any floor-to-ceiling mirrors, sketches a reflection of the room in the mirror on the map, and attempts to smash the looking glass repeatedly. Such mirrors on the map must be manually blocked with an artificial barrier. Fine dust can electrify and attach to surfaces so fiercely that neither the side brush nor the main brush can remove it if the apartment is extremely dry (for instance, during the winter when the heating is switched on). Additionally, it adheres to the vacuum cleaner's surface, so after cleaning—and particularly after cleaning carpets—you have to physically vacuum the vacuum cleaner by hand. Due to the fact that the napkin itself gathers dirt during wet cleaning and eventually just starts to smear it, streaks frequently persist after cleaning with water. If the carpet is thin, it will move and collapse when you attempt to drive on it. Prior to cleaning, it is vital to clean all small and thin carpets.