Review on 🔒 Raven R1508 2-Inch PVC Termination Vent with Stainless Steel Screen, 2-Inch by Todd Atherton

Frogs fall into the roof vent pipe and then sneak into the toilet. Needless to say, VERY disturbing! Use this piece of vent screen to place it in a 2" PVC elbow and then connect it to a very short, straight 2" piece of PVC pipe about 3" long with another 2" PVC pipe Attach bracket at opposite end. The view was like an old phone! Had it been placed onto the current roof vent pipe WITHOUT gluing - this was suggested (no gluing) in case it ever needs to be removed. It would be possible not to cut all of this into pieces if they weren't glued or glued to the vent pipe. It connected snugly and securely, and the PVC shield (item listed here) fitted snugly and snugly into the PVC elbow (elbow and a straight piece of PVC bought at a local hardware store - the elbows sold here were too small /short and wrong angled In the end, the whole jig makes the vent pipe coming out of the roof look like a candy can.This shape ensures proper airflow and prevents leaves, snow or ice from clogging the top of the screen.The screen part has a small duct This allows liquid to drain away if there is condensation No frogs or slippery objects can get into the pipe Wasp nests are easy to remove if they decide to build on it - just tilt the trellis/hole towards the edge of the roof so you can see and achieve it.