Review on 🛁 KES Bathroom Shelf, 19.6-Inch Tempered Glass Shelf (8mm Thick) Wall Mount, Brushed Nickel Finish - BGS3201-2 by Jon Joung

The product works as intended but without instructions. So I'll leave the instructions here. Placement instructions: 1. Loosen the screw at the bottom of both metal pieces to open the gap between the rubber pieces holding the glass in place.2. Insert the glass into the hole and tighten.3. Move the piece of metal around until you are happy with its placement.4. Measure the distance from the center of one piece of metal horizontally to the center of another piece of metal. Should be about 8-10 inches.5. Find the place where you want to mount it on the wall. Mark the top center of each piece of metal on the wall. Disassembly and Installation: 1. Completely remove the screw from the bottom of the stainless steel part. It is divided into two parts.2. Take the part with the holes and place it on the wall with the metal part facing up, exactly as you positioned it when attaching it to the wall.3. Mark the location for 2 screws on each side.4. Attach the pieces to the wall. Watch out for the pins. If there is a stud, don't use a plastic drywall anchor. If there is no bolt, use a plastic drywall anchor.5. When 2 parts are attached to the wall, take one of the other metal parts (the part that slides) and slide it from the bottom until it stops. Insert the previously removed screw and tighten it slightly. 7. Drop the piece of metal and rest on the screw, then continue screwing until there is a 1/2 inch gap between the rubber pieces on either side.8. Insert a piece of glass and tighten the screws on the bottom until snug. Welcome back.