Review on 🔧 ATOTO AC-UTP1 USB TPMS Tire Pressure Monitoring System for ATOTO A6 & S8 Android Car Stereos (External Sensors) by Doug Darling

ATOTO A6 installed about a year ago. Just received and installed this kit. The sensors are easy to install, and once you've installed the app, it's easy to navigate. The receiver was easy to install by simply plugging into the USB port on the back of the A6. Two strips of 3 m long assembly tape make assembly easier. Keep an eye on your cables to make sure they aren't installed in a spot that gets in the way of the frame, cables or whatever. I recommend installing the app first and then the sensors, which are labeled to avoid confusion. I did as instructed, sensors first, then the app, and the app indicated all the tires were leaking. Sensors removed and reinstalled and readings were normal. Don't forget to allow installation from unauthorized sources. With the app you can set the maximum and minimum pressure and temperature, enable or disable the alarm and change the units of measurement depending on the zone and even settings for a backup sensor (if you have a 5th sensor). The default screen shows the temperature and current tire pressure. So far, so good!