As the description says, this wire is flexible and easy to work with. I needed this length to make a jumper cable when using my 9500 lb winch on the back of a truck. The factory wiring harness was about $250, so I used this cable and some quick connectors to make it a lot smaller. I crimped the wire into the terminal lugs and then soldered them on for connection and durability. They are slightly smaller than the 4 gauge wire that came with the winch, but there was no significant loss of tension when I tested it with a multimeter after assembling the wires together. Not sure about durability as the outer shell is not as rigid but allows for more flexibility.
Hakko 599B 02 Wire Type Soldering Cleaner
11 Review
Inverter welding machine CET CET MMA 200A, MMA
23 Review
Hakko T18-BR02 Soldering Tip - T18 Series for Hakko FX-888/FX-8801 - Conical Shape - Bent 30 Degrees - R0.2 mm x 10.5 mm
12 Review
π₯ Whizzotech Solder Wire 60/40 Tin/Lead with Flux Rosin Core - 0.032 Inch Diameter for Electrical Soldering (4oz/100g/0.22lb)
13 Review