I bought this to inflate a motor grader tire on my AW 88H and it has worked flawlessly. I didn't time it, but maybe 15 or 20 minutes to get it from 20psi to 30psi (for transport). Also, the tire was about 1/3 buried. right behind him, so he struggled to free himself and rose from captivity. It's a bit pricey indeed, but these are the biggest tires I've got on my gear here, so I'm sure this compressor will handle anything else that might need air in a remote location. Шланг немного нагрелся, а выпускное отверстие компрессора стало слишком горячим, чтобы до него можно было дотронуться, но ручка была в порядке, и к самому компрессору можно было прикасаться, как и к двигателю, вчера температура окружающей среды была около 90 ° F. Потрясающая маленькая Automobile. , and a premium bag. The only complaint is that the gauge and trigger assembly length was a bit short, but this is a very large tire and the valve stem was at the 1 o'clock mark. So if you have tractors or trucks I recommend this compressor. it should handle just about anything you can get through it. I should mention that I used a Jump-N-Carry JNC660 1700 Peak Amp 12V Jump Starter for power, not a grader battery. also highly recommended. The compressor was 100% dead. For your health!