Review on ⚡ Lotos LTP5000D 50 Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, Brown - Improved SEO-friendly Product Name by Raj Mazzabufi

I don't know why my experience compares so poorly to everyone else, but it didn't work. From the box I could see that it was tested but had a very weak arc. I contacted the manufacturer, after some tests they decided to send me a new one. Same problem. I decided to open it up and take a look around as this seemed to be an issue. Very weak ground wire (I don't recommend anyone to open it without electrical experience). The screw holding the wire to the frame came loose. I sanded the paint off, recut all the threads for a larger threaded screw and then it worked. After about 30 minutes of use, for a week or so, it stopped working again. So I moved the ground wire to a new location on the frame. It worked. Made a few cuts, postponed for another week, that's not possible. Can't find good land anymore. Right now it just sits on the shelf like a waste of money. While it worked, it cut great. But terribly built. After the second unit failed, I didn't even bother to contact the manufacturer to fix or replace the unit. I'm not telling anyone to buy or not to buy, just sharing my experience.