Review on 🔥 ACDelco Gold 17D1414CH: High-Performance Ceramic Front Disc Brake Pad Set for Superior Braking by Dan Bobbert

Pleasantly surprised by the performance and quiet operation of this mat. Combined with the ACDelco 18A2461 Professional rotors, they replaced the PowerStop Z23 kit which had a hot rotor failure. The lining wear in relation to the rotor surface is the same over the entire surface of the rotor, of the same color, without streaks or spots. Significantly better than the previously used OEM and PowerStops. The calipers were disassembled, carefully cleaned with a wire sleeve, and the brakes were cleaned of corrosion and dirt. Lubricate the pad grooves, guide pins and pad base with synthetic brake grease. Make sure the pads slide freely on the guides. In the procedure performed a typical pad setting. The result of any work on the brake is of great importance for the preparation and cleanliness of the mating surfaces of the caliper and pad. The block should move freely and easily in the guides. The result is constant braking, no vibration and very little dust. The brakes work well even after frequent hard stops. After 6,000 km on the pads I would buy them again.