Review on 🔴 StrongHero3D PETG Filament for 3D Printers - 1 by Mark Ponnusamy

Just received yesterday and opened today. It was packed in a vacuum sealed box with a desiccant bag. However, as other reviewers note, the filament ships from the factory with marks or scratches on the filament. There is also black debris scattered about the coiled thread. As you can see in the photos some of this black residue has fallen onto the print and is visible on both the bottom and top layers. The holes at the top are my fault as I didn't use a fan and only filled 10%. Printed on 220 nozzle and 60 bed The top layer consists of three layers. Luckily, it REALLY looked like gold. Good color and gloss. ADVANTAGES: Looks like gold. Beautiful shine. CONS: Filament has pot marks, looks like tooth marks. after about 14 hours it started to clog the extruder. I should have stopped it immediately but I was hoping it was just an incident. Well it didn't, and it ended up clogging my hotend, ruining my print, and actually ruining my hotend carriage that I had printed due to clogging, causing some serious thermal creep. I would NOT recommend buying.