Review on 🚴 Enhance Your Ride with Clean Motion Rhinodillos Bicycle Tire Liners by Tony Francis

Quality product. It takes a little patience to install them properly, just like any protective coating. Have them mounted on stock 26" MTB tires. TIPS - (Instructions are a little vague.) Tires Silver sidewalls - Blue sidewalls face the tube. End opposite the yellow tapered end) if you like. However, I recommend an overlap of at least an inch or two to ensure full coverage. I haven't installed liners on many moons so had to do some cleaning up. YouTube was a great resource as always. RECOMMENDATION: While I was disassembling the tires I replaced the stock inner tubes with a Continental 26" Schrader Valve Hose - 26 x 1.75-2.5cc. See REASONS: Better quality metal valve stem and hoses. The metal valve stem on these tubes, like the Presta valve stem, has a lock nut. The B/c lock nut keeps the valve stem retracted through the rim, inflating a flat tire is very easy, particularly in relation to the connection of the pump head to the valve stem. (An un-locked stem tends to sink into the tire, which is very frustrating when trying to fix the tire in adverse conditions.) No). I prefer to only tighten the locknut on the rim (on Presta and Shrader stems) when inflating. In all other cases, I leave the locknut about 1/8" to 1/4" from the rim (to avoid stressing the stem). INTENT TO ADD THESE LINERS (and the above tubes): to improve tire integrity and reliability. as well as security. peace of mind.