Review on 🚙 Enhance Your Jeep Wrangler TJ with RAMPAGE PRODUCTS 769015 Roll Bar Full Padding Kit in Sleek Black Denim by Chris Rigsby

This was the cheapest set of roll bar covers I found for my Jeep Wrangler TJ. Now I understand why. This roll bar kit will not fit the '97 Jeep Wrangler TJ Sport at all. The front glass support pads do not have zippers. So to install the front glass support pads you need to loosen 8 screws, tilt the windshield forward and pull the pads on the slats. These caps have 2 large holes, one for the last screw to be replaced but I have no idea what the other is for. The caps are also about 3 inches short to cover the full length of the bars and are such a small diameter that I had to spray WD40 on the bars to get the caps on. The remaining 3 parts of the cover fit without too much trouble, except again they just didn't fit. The seat belt openings do not line up and the covers have large gaps at the junction between the main roll bar and the two rear roll bars. The last and most frustrating part of the whole kit are the 2 rear cross member covers which are so short they leave 10" of the bar uncovered and again the seat belt holes do not line up with one of the bolts. What I really like is the colour. At least as delivered, the black color is very nice and matches the bikini top (Rampage 94215 Denim Black Topper with Pocket) that I bought and attached at the same time. I would not recommend this product. I can take it off, return it and try another set.