Review on 🚴 Adjustable Aluminum Alloy Bike Rear Rack - UFANME Bicycle Cargo Holder for Panniers Bags, Luggage, and 50kg Load Capacity with Reflector - Easy Installation Video Included by Devin Jirsa

Guys: This is a good product, very durable and I'm really glad I bought them (2: one for each bike; BUT, no indication. It's not difficult Understand but there are a few things you need to know I have a Trek Hybrid My wife has a K-2 Hybrid There are 2 sets of bolts one shorter than the other to allow them to go that far stuck in the bike as possible Screw The large screws are on the product, the shorter ones are in a separate bag, in this small bag there are also the rubber grommets, you must use them, otherwise the parts hanging on your frame will be too are loose and not tightened enough to be secure especially on the seatpost.I didn't even open the bag when fitting the 1st bracket and was disappointed that none of the hardware was tight and secure.There Then I saw the extra pocket, opened it up and had a "ghost" moment. on them so you don't need a 10mm spanner which I did. You need to make sure they stay in the flange while you tighten the bolt. Set the reflector to 1. I adjusted my bracket so that the platform was fully extended and was then unable to mount the reflector. Important: DO NOT tighten ANY of your screws until you have both sides of support and the holder is in place. be it. You may need to tilt the frame connector in or out to get the correct adjustment. The porter took about 15. Hope that helps!