Review on 🧼 Dual Action Dishwasher Cleaner: Combat Grease & Limescale, Fresh Scent, 8.45oz by Tim Venkatasubramanian

I love my home appliances the way men love their cars and the way real ladies love their diamonds. I take care of her because she helps me with my household chores. And in order for her to serve longer, work better, there are many opportunities to help her with this. I am sure that many dissatisfaction with the work of household appliances arise from the consumer due to insufficient care for this technique itself, including. I have a dishwasher Bosch SMS40D12 RU. Today I will share with you the experience of caring for her with the Finish cleaner. The single-use bottle has an original flat shape and a working solution volume of 250 ml. The cork is fixed tightly and is not a removable element. There is a hole sealed with wax under the sealing sticker on the cork. There is a step-by-step instruction for using the drug on the package. There you will find all the necessary information on the composition. Please do not drink or wash your face with this product. Use strictly as directed. The composition is monosyllabic - surfactant, 5% and above, but not more than 15%. Only now it is not clear, but from what these percentages were counted? The dissolution medium for these surfactants is not specified. The product itself is a two-phase liquid, transparent cornflower blue. I am not specifically puzzled by the decoding of these surfactants, so as not to torment myself and others with unnecessary information. It is more important for me how this tool works, whether it performs its main functions. If someone doesn’t like the composition, I recommend turning on the rinse mode after cleaning. This is for the especially sensitive. In fact, it is natural that active chemicals cannot be dispensed with to remove scale and hardened fats. Therefore, by additional rinsing, we minimize the residual effect of these products. And by and large - how else can you wash all the hidden and inaccessible containers. The solution circulates in the system. The machine works in a closed cycle, not running water. Also, I don't have injectors. Water in the first cycle is obtained with the remnants of food, fats and other impurities. All of them must be brought into a dissolved state, then washed. So I propose to just wash, and not to think. Rip off the sticker -- put the bottle in the car upside down, - - select the washing mode with a temperature not lower than 65 * C - and go ahead, the process has begun. - - During the operation of the dishwasher, under the influence of hot water, the wax will dissolve and the working liquid will drop by drop into the washing solution. The instructions do not say whether it is necessary to shake this mixture before use, so we do not do this. Maybe there is a certain sense in this, that at first the transparent component will enter the wash water, and then the cornflower blue. Our chosen mode is two hours and twenty minutes long. Therefore, while the test process is underway, there is time to talk about the need for such processing of dishwashers. I am a supporter of manufacturers' recommendations. If it is recommended to process once every three months or six months, I will do so. I will not wait for visible dirt and obscene smell in the car. I find that small deposits of scale and grease are removed faster and 100% cleaner than thicker and hardened ones. It is not clear to me what kind of smells they are talking about, I have never noticed that my dishwashers smelled. I have two of them - at home and in the country. I can also note that I always load special salt, regardless of the use of solo (everything separately) or complex products (capsules and tablets). Today I have an unscheduled treatment. No, not to tell you about it. Or rather, not only for this. There was just a problem with clean dishes. Yesterday, after washing, white dense smudges remained on the glasses. -- And today the same smudges remained on the car door. -- I've never seen anything like this before in the life of the machine. And the nature of these spots is completely incomprehensible to me. Moreover, it was not possible to remove them with a clean, damp cloth. In general, such problems appear when there is a lack of rinse aid, but my dosage of rinse aid is not regulated. This block only has a filler hole. -- Perhaps either the hardness of the water has increased, or the machine itself needs to be cleaned, or there is a third circumstance. In order not to guess with these either-or, I decided to start by cleaning the car. Moreover, the last cleaning was 5 months ago. By the time it would be time. I did a visual inspection before turning on the machine. Everything is quite clean, accumulations of fat are not particularly observed anywhere, apart from small deposits on the seal and a slight coating on the nozzles and filter. -- I clean the filter and injectors once a week. Grease can accumulate on them during washing. I am sure that the smell in the car appears if such treatments are carried out irregularly, the fat goes rancid and starts to smell. It will not be possible to see how much the shadows are covered with scale or not, since for this it is necessary to disassemble the machine. Naturally, I won't do it. So far, the machine has completed its cycle and we have the opportunity to evaluate the cleaning procedure. I want to share one more subtlety. I don't wait to dry. After washing, there is no point in drying and wasting extra electricity, since there are no dishes there. I stop, reset the program and check the quality of cleaning. I opened the door and there was no strong smell. Light fragrance of freshness. The flavoring is present in the composition, but which one is not indicated. The tool has been completely used up. -- Door without smudges, as always. -- seals are clean -- filter and rocker arms are also in order. -- I am one of the suspicious ones, so after cleaning I always rinse extra. Today, instead of rinsing, I put on a short program for washing glasses. I want to see what will happen to the smudges left from the previous wash. When finished, everything looked very clean and shiny. -- Now we can definitely conclude that the timely processing of dishwashers affects not only the working condition of the unit, but also the quality of its work, that is, the quality of the washed dishes. Technology loves prevention, we must remember this. And the interior after such processing looks great. -- The cost is certainly high - 390 rubles. But if you consider that this is necessary every six months, then it seems already not very expensive. This line does not come cheap. But there is an opportunity to buy on the stock. I bought with bonuses in MVideo. So I recommend the Finish cleaner for periodic processing of PMM and put a solid "5". I absolutely loved the Finish. Love and take care of your helpers. They are working for you.