Review on ANYCUBIC UV Curing Printer: Unbeatable Precision and Print Quality by Patrick Ross

It took a long time to get this set up correctly but once I got it done I'm very happy with the results on my Phrozen Sonic Mini 4k. The settings that seem to work best for me with a 0.03mm delay are 3 seconds exposure, 5mm life and 11 seconds lights out at 60mm stroke speed, although I think I'll crank them up to 50 for large prints mm will decrease. Bottom layer adhesion was good (6 layers, 35 seconds), the main problem I had was the top layers sticking and not falling off the supports. At less than 3 seconds the model falls, although the calibration matrix shows 2 seconds as the best exposure. But even at a 3 second shutter speed, the thumbnails I printed don't appear overexposed at all. I'm by no means an expert so don't take any of this for granted, but this worked for me. I have a Phrozen brand 4K resin, I will do some comparisons but this resin is on my list of potential resins.