Review on 🔩 Makita FD10Z Cordless Lithium Ion Driver Drill by William Turner

While most of my power tools are cordless, all my power tools are 18v; I have several 12v Makita CXT tools to add to my line of 18v tools. Before I continue, let me say that I bought this drill driver myself, I was not offered a fee for this review and so on. In short, the opinions contained herein, apart from not being scientific, are my own and my own only. My experience shows that the 12v line complements my 18v line very well. Just this summer I built two large swings for close friends and repaired the third one inherited after 10 years of operation. When building and repairing, I often found that a 12V drill was preferred. The combination of power and battery life required to mount the smaller profile mounts and lighter weight meant I wasn't as tired was after I put 500-750 screws in some of these games. Of course, if I were a handyman and maybe used to turning hundreds of screws every day - maybe the weight of an 18 volt screwdriver wouldn't be something I'd be so unaccustomed to - but I'm not that and of a day since 90+ degrees and in the sun for 12-14 hours; Any benefit was welcomed. It was also welcomed that the benefits that are less tangible mean better outcomes. Using an 18V hammer drill to install 100-1" outdoor wood screws for cedar plank floors is not only unnecessary, the weight introduces fatigue and fatigue, which in turn leads to poorer results. and keys at every job. I didn't have to switch bits every time I encountered different sized fasteners and drill bits. The CXT screwdriver was primarily used for 1" to 1-1/2" Phillips and Robertson screws and 1/8" to 1/4" drill bits (for pilot drilling). 12V is also preferred for smaller 3/8" hex mounts and even 1/2" screws. 18 volt subcompacts and conventional drill/screwdrivers and impact tools were used for the large 1/2" holes and some 7/8" bolts to attach the main beams. And my platform of choice for hanging pictures or assembling flat furniture; The 12-volt CXT is compactly stowed away in my hallway closet and ready for use. In summary, this is a well built tool with the same impressive performance you would expect from Makita. I found great features, smooth operation and works well for the settings it was designed for. I have no hesitation in saying that this driver will perform admirably on many jobsite jobs.