Review on EFuncar Rocker Switch Lighted Motorcycle by Michael Jameson

Well... the terminals are too thick and too close together. So after I created my "plug-in terminals" and wires for the switch, I couldn't remove the mounting ring from the switch because the insulated terminals are now too thick. The heat shrink tubing I installed to prevent short circuits made it impossible to remove the mounting ring and/or pull the mounting shaft (with wires attached) through the hole I drilled in the panel for this. (For logistical reasons, my project has to be done with the wires connected. After this fiasco, I gave up the idea. I then carefully soldered the wires and added shrink tubing again. Now everything worked, but only for power cycling - that is: I can turn your lawn tractor headlights on and off but the LED does not light up at all regardless of the switch position That is correct, as is the wiring according to the instructions in the box I bought it just for the LED function (lots of reasons for that) .I don't return items less than $10 because I don't like the hassle.So...I threw it away.I'm going to buy something else that works.So I'm losing.In that case I recommend you click on buy at your own risk.