Review on Mopar 68235275AB Fuel Filter: Superior Filtering Efficiency for Enhanced Fuel Performance by Anthony Cano

Using an adjustable oil filter wrench, loosen the filter cover so that it can be turned slightly by hand. Then place a 1 gallon freezer bag over the filter and unscrew the cap. A few ounces of fuel and a filter cap dropped into the bag. Then, install the new O-ring that came with the filter, snap the new filter into the filter cap, and hand tighten onto the filter module. Tightened with an oil filter wrench as the specs are 19 ft-lbs - take it easy. Fill the module with fuel by turning on the ignition without starting the engine for about 20 seconds until you hear the filter pump noise decrease. Ready! It's easier to approach the filter from the back of the truck. Jack stands are recommended for safety reasons. Using a large piece of cardboard or other material, push it from the rear driver's side until you can see the filter north of the rear axle. It will have a yellow drain plug with a crosshair for the Phillips screwdriver. No need to unscrew the drain plug, just unscrew the filter cap.