Review on PointZero Pro Airbrush Air Compressor Regulator with Water-Trapping Filter by Linda Diaz

Works great once I figure it out. When I finally found all the fittings needed to run my compressor, it didn't seem to adjust anything. Out of the box it was set to "wide open" and the setting was not rotating. After playing around with this, I found that the adjustment knob needs to be held firmly and pulled up until you feel a click. It is now unlocked and can be customized. The attitude is somehow illogical. To decrease the pressure, turn the knob counterclockwise. This will take more twists than you expect (I discovered this in a fit of rage). Since it takes so many turns, you can make fine adjustments. When you have reached the desired pressure, firmly press the adjustment knob until you feel a "click" and it is now locked in place. Get a Winters brand, one and a half inch, 0-30 psi pressure gauge (available online at HomeDepot) and you're good to go. Despite all that, I love this case! After removing the mounting bracket (which most people won't use) it's even attractive! PS: Don't forget Teflon tape.