Review on 🔑 Convenient Keyless Entry Car Remote Uncut Ignition Fob Flip Key for Ford Lincoln Mercury – KeylessOption by Adam Gardner

To program the key fob you need to unlock the car, close all doors, turn the car on and off 8 times without starting the car. If you have done everything correctly, the doors will be closed and unlocked and you will be notified that you are in the car key programming mode, then click "Unlock". on the key fob and then remove the original key to exit programming mode. Now to program part of the key you have to cut the key out of the car, this can be done at Home Depot or Lowes for either free or $2.50. Working keys to start the process. Please note that the key you cut will open the door with the key but will not start, which means the key has not yet been programmed into the car. You take 2 original keys and save the key you want to program last. You take the 1st working key, turn the car to the "Will not start” position, leave it in the on position for 3-5 seconds, no more than 10 seconds, at least 3. Remove and insert the key then quickly a 2nd working key and turn on, wait 3-5 seconds is basically the same as the first key, then quickly take out the 2nd key and insert the 3rd key, aka unprogrammed key, it won't start for 3-5 seconds, then remove the key, all this must happen within 20 seconds. Now remove the key, wait 1-2 seconds after removing the key, now try to start the car, now it should start, congratulations, now you have a working key, you don't have to wait 1 minute, before trying again.