Review on 🔧 Enhance Performance with PQY Fuel Pressure Regulator: AN10 Feed & AN6 Return Line with Gauge & AN10 End Cap in Sleek Black Design by Joe Drew

With the stock spring I had over 100psi at idle with the adjuster fully extended. However, there are no leaks. I cut 3 coils *total* of the spring to get a pressure below 100psi. The device is now operating at either 45psi, which is too low, or over 100psi. There is absolutely no regulation. Remember I cut the coil half at a time and checked the pressure each time. Talk about wasting time! After spending a lot of time trying to get this to work I gave up and threw it in the trash where it should be. I bought Aeromotive FPR. It worked out of the box. I cannot recommend this PQY FPR to anyone for any reason.