Review on 🔫 Gedu High Pressure Spray Gun 1000cc Cup, 2.5mm Nozzle - Silver Finish by Adam Johnson

I've been looking at airless sprayers but I already have some HVLPs but they didn't work very well with latex paint. Thought I'd try this and it works great. First off, this isn't a cheap Chinese instrument, it's actually made in Japan, all metal and no plastic anywhere. Setup was easy, similar to HVLP setup. The pressure should be set at about 45psi, but with the trigger pulled it is about 35psi. I had small clogs, but these are easily cleared by wiping the tip. I used Kilz 2 primer (diluted 20% with water) and the same with outdoor latex paint. I currently use an 80 gallon compressor, but I'm sure it can be used on smaller ones as well. Cleaning with water was easy and really needs cleaning after each use. I also recommend the 3.0 nozzle with any thick paint or primer.