Review on Daystar Wrangler Transfer KJ01008BK America by William Wiley

About 5 months ago I "temporarily" reset the disc and there was still a slight gear vibration. I finally decided to order this kit and it feels like I'm driving a different car now. In time I will buy a SYE kit and get it "right" but I am very impressed with the quality of this kit, especially at this price point. Tip for anyone doing this for the first time: Place a jack and stand underneath. sliding plate. Starting on one side of the skid plate, remove the two outer screws, leaving the middle one alone. Then slowly loosen the middle screw. When the spacer is almost in, raise the jack until it just touches the skid plate (as a precaution if you back out the bolt too far). Then unscrew the middle screw until you can insert the gasket together with the new screws in the two outer holes. After installation, completely remove the center screw and install a new screw and gasket. Repeat on the other side. Installation takes about half an hour, including gathering tools and a beer break.