2-Pack Metal Plant Stand - Adjustable Width Fits 8 To 12 Inch Pots, Mid-Century Flower Holder For Corner Display - Black (Planter And Pot Not Included) Review

Bulky, thick - which makes for stable and sturdy. However, it doesn't need that as it only widens to a certain size for up to 12 inch pot that a thinner design would accommodate nicely. Instead of returning, I kept it since I had already assembled it, and painful to disassembled - besides, after disassembling it's basically ruined and amazon cannot resell. But now, every time I walk pass them/I look and think = just too bulky and thick.

An OK deal for the price because you get two. Nothing fancy, just black metal and will go anywhere. They do not sit even due to the screw hole placement for the adjusting width. It might not fall apart, but it just looks a bit flimsy.Packaging and shipment was great. No defects or damage. Instructions (English) were not very clear but easy enough to figure out. Make sure you insert the feet with the screw holes in the legs touching the floor.

First, this product is remarkably easy to assemble. It IS important to decide before assembly which way up you want it, as the end caps, one set of which (top) are solid, the other threaded, (bottom, for the adjusting screw leg caps), once in place are not easy to get back out. Also, if you don't already own a rubber mallet, for household chores, it may be advisable to buy one, as it makes cap insertion very easy -- and you'll find such a mallet will come in handy for other tasks.Good product.

Two plant stands for this price is GREAT but you get what you pay for. First, I oversee production for military products… definitely out of the spectrum for a plant stand. I assembled the stands with high hopes. The material looked nice for the price but the legs are wobbly and not straight when torqued down. A bit disappointed but will keep as plant stands seem to be unreasonably expensive and hard to come by.

I purchased several different plant stands, including this set. These were a bit of a disappointment. They were clumsy to put together and are hard to adjust. These stands need the screws tightened into place for proper adjustment to the pot. I found it difficult to do.These stands are in the flimsy side and a bit wobbly.One stand came with a foot screw that was incorrectly threaded, so as of right now I have one unuseable stand until I can have that screw rethreaded.

After I purchased these stands I read the reviews and they were mixed. I was a little disappointed when I opened the box BUT I will say they are really looking good. Here’s the thing- USE HEAVY PLANTERS! The weight of the plant/planter is needed to keep these adjustable stands to stay put. Tighten the screws if they are loose and level out the feet if it’s wobbly. These were very easy to work with if you do these things. The planters I have are terra cotta or concrete planters.I may purchase a…

Sturdy, easy to put together ( had to use a rubber mallet on the end pieces). I took off 1 star because 1 of the stands had the paint scratched off on the inside bars, I am keeping it because with the plant in it it does not show and a little black spray paint fixed it) but very obvious, so who ever packaged it had to know.I would buy it again.I put the Potey planter in it, those are fabulous.

I ordered these plant stands in order to upgrade my sun room. We have plants scattered everywhere as I have too many for my plant rack. These plant stands helped me rearrange and also helped me move my plants closer to windows and sunlight. These plant stands are great quality and customizable. They can be assembled in two height options, I did one of each. I would suggest that you pick the height before hand as it is not easy to modify. Also, the width of the stand is easily adjustable to give

These are exactly as advertised. We are using them on a covered porch to hold two square and quite heavy planters. So far so good. The caps took a little elbow grease to push in. The feet are adjustable, which worked great in getting them level and sturdy. Two nits:1. It's difficult to tighten the screws adjusting the width of the plant stand with the planter in place for a tight fit, but that's mostly my problem.2. There are two types of caps--flat caps for the top and adjustable foot caps for

These stands do the job for the price, but one came with a defective screw, so it cannot be tightened and remains unstable. Rather than sending me a new screw, ebay wanted me to pack it all up and send it back for a replacement, which is a royal waste of my time.I contacted the seller directly, and they promptly provided me with a credit with which to purchase replacement parts from their store. I really appreciated the good service.

Pros: these are truly adjustable because of the slider design so you are not stuck with only 2 sizes which is what most stands offer. Cons: Very disappointed with the quality. The stand are metal so you’d expect a lot more sturdiness, however these are terribly wobbly and uneven. You need a screwdriver and a hammer to assemble these, while other stands have just been pretty much plug and play. You also have to pick one side (tall or short) as they have different type of square, plastic felt…

The product is somewhat stable but the knobs and tops on the legs would not fit properly, so I went without them. It holds up tho.

It’s difficult to explain but when tightening the screws to set the width around whatever pot you select, the legs become not square. Otherwise it’s a good design but if you’re a perfectionist just know that the flexibility of this stand comes with that irksome detail.

The stands are easy enough to put together, but getting the legs even and balanced is nearly impossible. So if you are going to put these in a highly visable area you will be disappointed in how they look. As soon as I can find replacements for them, these two stands are going into less visable spots.

Easy to assemble. Great directions. Hardware required two types of screwdrivers and a small hammer. Easy! Choose your pot and any drip plate you'll use under it first (you'll need its width and height). I ordered a set of two-- set them up to match. They look great in front of my patio doors.

For the price you cant beat it. It is easy to put together and looks ok. I marked a star off because a screw came with threads filled in which made it unusable and also some of the plastic feet did not want to stay in the stand when moving it. All that said, it is sturdy and I would definitely buy again if I need more stands that are not a focal point of a room.

I love these plant stands! I have a few larger plants that were outgrowing the counters they were sitting on and opted to buy some plant stands. These did not disappoint! They are built well and I love that they’re adjustable to accommodate different size pots. Will definitely buy more as needed!

I love the look of the stands and that you can expand them. The problem is the screws would not fit. We had to use different screws to put it together.

the most basic plant stands on this website, likely. will they hold up your plants? sure. will they be a bit crooked? sure! they are functional, not attractive, but get the job done.

Sadly I am returning these. The design is terrible. There is a center piece and each leg is independent, which means it is difficult to get them all even and straight. Not to add that the screw meant to hold the legs in place, when tightened pull the leg off balance. I would not recommend in general, but I guess if you’re looking for an economical option and your plant/planter is not heavy then it probably would work for you.