5-Pack Replacement Kit For Charbroil 6 Burner Gas Grill - Stainless Steel Burners, Crossover Tubes & Porcelain Heat Plates - Direct Store Parts DG258 Review

We will see about the longevity of this product. The one complaint I have with this is that the screws to attach the cross over tubes will not bite to attach the tubes. They just spin in the holes and strip. Also the kit didn’t come with new hardware for the burners, kind of a bummer, other than that it was an easy install.

Easy to install and work's as expected. Good product for the money. The reason I didn't give it five stars is I found the crossover tubes seem to loose some lp. May have to try and put a few rivets in to stop the leak.

This was just what I needed to refurbish my 6 burner grill. I didn't need all 5 burners, crossover tubes, or heat deflectors. I just replaced the ones that were rusted out because I use them more often, so I have leftover parts for the next time something rusts out. Grill works like new now for a tiny fraction of the cost of a new one.FYI if the tabs on the burner tents don't quite line up with the slots, just squeeze them together slightly while installing. They'll fit right in.

The product looked nice and new, but when it came to installing, the heat vents did not fit like my previous ones. The screws they sent to put the burners all together did not screw into each other correctly. I would suggest sending screws to tighten it to the grills itself as well; those were not provided and I needed them. Overall was not a fan of this product as it is just sitting in my grill now and not tightened down to be secure. Hopefully it will work correctly. My model of grille by the

First no screws to mount the new stainless burner tubes, second the crossover tube screws do not fit in the burner tubes, way to big, and lastly the heat tents are way to big, and to flat. Thought I would save some money and order online from ebay instead of Char-Broil. By the time I drove the 40 mile round trip to get screws and all the frustration it's just not worth the hassle.

I bought this set because the seller claimed it was made from stainless steel. After the first season parts began to rust. I busted out the grill this year to get everything going and this is what I find. There is no way this is stainless steel

easy to install, flame deflectors had to be squeezed to fit into slots . burners worked well! I would buy again! May be difficult to find in stores!

The grill component parts were properly packaged and matched the original equipment.None of the fasteners (sheet metal screws) that were supplied were useful. A visit to the hardware store will be necessary.

First of all: yes, I'm sure that my model was listed as one of the compatible models these should fit.1. The "porcelain" shields do not fit. See video.2. It's missing the crossover tubes and nuts and bolts it was supposed to come with.3. After installing the burners they do not light. The searing burner I bought directly from Charbroil works fine but these replacement burners do not ignite. See video.

Bought the burner kit to replace the burner tents, burners, and feeder tube on my Char Broil grill as they were falling apart. Delivery was fast and all parts were there, packed very well. I have used the grill a couple times now as was winter here in Michigan (Feb was bad weather); now the weather is breaking.Mid March and I can't wait to use it more now! Everything works great and have to say, the Ball Tip Sizzlers tasted wonderful!

Fast shipping. All parts fit great. Only complaint was no screws for the burner tubes, only for the carryover pieces. Excellent value and saved me some cash and the grill works like new.

I have a charbroil classic , and was unsure of the part number, I measured the parts needed and found this seller, the burner size was confusing as it calls out 1 inch, the nozzle size is 1/2 or 5/8's but not included in the description? I needed the heat tents more than the burners, so I took a chance and the price is a true value for what you get. everything fit prefect!.even the gas carryover tube that lights the other burners.also not very clear in the description ? I think there…

Everything fit perfectly. Wanted to buy a whole new grill, but this worked out great. I wish the nuts and bolts to hold the burners would have been included though. The old ones were too deteriorated to salvage. Had some extras in the garage that worked

When the rebuild kit can in I was able to put it in and was using it with very little rework. The only thing that was hard to do was remove the old parts and not damage other parts of the grill

Got all my parts in a timely matter. Everything fit perfect. Just wish I could have got the drip pan from ebay. Had to buy it from Char-Broil

Very good price compared to original manufacturer's replacement parts website. Our older model number was listed as a "fits" - it did take a little bit of modifying (slight bending) to fit the flame spreaders. Also, the supplied screws did not fit our model, but it was easy to find some small bots/nuts to attach the burners. Be sure to note exactly how the old pieces were installed so that you don't put the burners upside down or put the igniter off center. All in all, a good inexpensive fix to

3 of the 5 burner tubes have completely deteriorated and 3 of the crossover tubes are not useable any longer. Grill is covered after every use.

Parts were better quality than original. Heat shields were a heavier gauge metal as well as the ceramic coating. Tubes for gas and carry overs were spot on for line up replacement. Other suppliers wanted 3x more. Im really satisfied with the delivery being on time and the quality of replacement parts for my char-broil 6 burner grill. 5 star thumbs up! Anthony B from Florida

The parts were a good replacement for my rusted out originals. The grill is working like new. The price was fair and the replacement was simple

Easy to install and was a direct replacement for the factory burner setup. Saved us a lot of money not having to purchase a new grill.