ABN Quiet Garage Door Rollers Nylon Door Wheels Replacement Garage Roller, White 2In 13 Ball Bearing 4In Stem 10Pk Review

Why did I not change out these rollers a long time ago. I have two single car garage doors that require 10 rollers each so I purchase two sets. With a cordless impact and socket it took me about 10 minutes a door to change out (very easy). All I can say is what a difference it made with cutting down the noise. Before you could hear the garage door being open throughout the house and now you can't. I figured they would make a difference but all I hear now is just the motor of the opener not…

When my garage door started having trouble opening and closing, I decided to replace my 50 year old rollers which did not look good. These were nylon vs. the steel rollers I had in my garage so this would make the door quieter. I did some research on the best way to replace them and was able to replace all 10 in 30 minutes. The best way is to bend the metal guide just enough near the top of the garage door to allow you to remove each roller and replace it with a new one. As each roller is…

I don’t usually write reviews but I had to for this product. Bought and installed a new garage door opener but it struggled to close my door because the rollers were old, metal and worn. These babies were just the ticket. Removed and cleaned the old brackets with WD-40, lubricated the new rollers with a high quality lubricant, installed and PRESTO. My garage door opens quieter than the crickets chirping outside. Be careful if your bottom roller bracket is attached to the spring! It’s a little…

Replacement rolls improve flow of overhead garage doors. Easy to install, just loosen flange bolts and slide out/in rolls. 15 minute job per door.

Very easy to install. Watch a youtube video before hand, all you have to do is bend back the track a little bit and then pull the old ones out. I had to disassemble the top hinge to get that one out (easy 4 bolts). Work good so far and seem to make the garage door a little quieter.

Rollers are ok for the price. had to bend the track to remove and replace the rollers .Once in they have functioned well are fine but NOISY

I paid a garage tune up service over $150 to fix my noisy door and all they did was put in a set of Nylon rollers. I did the second door (6 years later) myself using these rollers, and the door is now virtually silent except for the motor running on the opener. It has only been a week, so I hope they stand the test of time, but only took 15-20 minutes to install.

After bids from a local garage door company in excess of $250, l decided to try these at a COMPLETLY REASONABLE price of $15 and an hour of my time. Now my door is so quiet and smooth you can hardly hear it.

These garage door rollers work perfectly! Our (builder grade) garage door rollers were so noisy you could hear the garage door opening from ALL OVER THE HOUSE! These replacement rollers were easy to install and it took about less than an hour to install them.

Original rollers had seen better days and needed to be replaced. After searching I found these and decided to try them out as the price was not bad. Package arrived on time and the rollers were easy to install. The nylon rollers are noticeably quieter then previous metal ones. After a few weeks they are holding up well and I am pleased with the purchase.

These rollers worked perfectly to build my own elevator in my garage. I used a die to add threads, so I can lock nut them into place. They are solid, so adding threads did not reduce integrity

New rollers roll very nicely. Now all I hear is the screw drive screwing along! If your tracks are straight and solid these make less noise than the wobbly metal ones. If you are a do-it-yourself handy sort these are easy. To do the bottom rollers (bracket with pull wire on side) put the door all the way up. Then should be able to pull wire off with a little umph. Tension on mine is when door all the way down, ergo spring tension helps lift the door when opened. My bottom brackets had locating…

I was able to easily install all the rollers except for the bottom rollers. Due to tension line and spring, you have to follow some You-Tube videos so as not to do incorrectly or cause injury. Much quieter and expect them to last longer.

Watch a video on how to install before you do anything! Otherwise we had no issues. My garage door is so quiet now! Love it!

These nylon wheels are a great replacement for the all metal ones. They are very quiet. I bought them again for my other door.

These rollers are probably a thousand times quieter than my old steel ones. The garage door would shake and make so much noise when opening, but this small amount of maintenance from greasing and replacing the rollers made world of difference. Very easy to install, I did a combination of the unbolting the brackets and popping the bottom bracket out by bending the track.

I only put 3 stars for noise level because I have a chain driven garage door opener and no wheel in the world can keep it very quiet! The wheels work great I used white lithium grease on the rods and put some in the track at each wheel as part of the installation. I did not change the bottom 2 wheels because I did not want to damage/distort the track, the bottom 2 are directly connected to the spring and removing the screws needs to be done with great care, or in my case not at all.

Replaced older steel wheel rollers that were very noisy and rattled when opening and closing. These new rollers reduced the noise significantly and were very easy to install with a claw hammer to slightly bend the edge of the roller rail and a screw driver to pop the old ones out.

It was not possible to know if these rollers were pre-lubed at the factory. Using the email address on the U.S. seller's web site connected me to Thailand - who were not very helpful. A phone call to the seller here said they were not lubed and I could just use any proper garage door lube. The problem is there is little to no access to the ball bearings, so the lube would have to be very thin to get inside. As well the only oil access is on the track side of the roller, which is blocked by the…

The installation was simpler then I had thought they would be to install. After installing, I had to hear if they were quieter as advertised. Yes, they are quiet. They also rattled less in the tracks, which is also a plus.