Description of Acrylic paint Rust-Oleum Chalky Finish Furniture Paint matte anthracite 0.125 l 0.24 kg
Rust-Oleum Chalky Finish - Ultra-Matte Decorative Paint Provides a smooth, ultra-matte velvety finish with high coverage and adhesion. Transform and restore the appearance of furniture and interior items.
The surface to be decorated can be easily aged to give a noble "vintage" look.
Self-priming, does not require special surface preparation and pre-priming*;Highly concentrated, one coat is enough on most surfaces;Good adhesion to old paints and varnishes;Easy to apply;Water-based, virtually odorless;For interior use.visual effect: elegant smooth velvety ultra-matt finish in various colours. perfect adhesion to wood (bare/painted) as well as to brick, stone, plaster or any suitably primed hard surface.
Limitations: Not suitable for use directly on metal. The paint does not block stains. For problematic surfaces, pre-priming is recommended - for example, all surfaces where staining is possible, including knots. If you are unsure of the adhesion characteristics to the surface to be painted, test it on an inconspicuous area before painting the entire object. Consumption: 14 sq. m / l may vary depending on the type of surface or method of application. Tool: quality brush with soft synthetic bristles, fine or forked tip; roller "flock" or roller "velor" with pile up to 5 mm; high pressure or airless spray gun.
Rust-Oleum paint for furniture chalk, odorless paint, wood paint, door paint, kitchen facade paint, kitchen paint, matte finish paint, quick-drying matte finish paint, water-based paint Chalk velvet, wood paint Chalk velvet, paint white chalk. The paint is odorless and safe for indoor use.
There are surfaces where preparation for painting requires more attention: Previously painted surfaces with peeling and cracked paint. Remove cracked or flaking paint and rust with a stiff brush or sanding. To do this, use abrasive wheels / sponges with grit No. 80 / 180 / 240 or 320. Remove the dust generated during sanding and proceed with painting.
Lacquer furniture "Soviet times". The surface of such furniture must be sanded with an abrasive sponge with grain No. 240 (matte) glossy surfaces. If desired, apply an additional 1 coat of Zinsser Bulls Eye 1-2-3 Primer (Ref. No.) as primer for excellent adhesion.
Surfaces previously coated with protective waxes or polishes. To remove the wax, wipe the surface with a cloth dampened with white spirit.
Make sure that the wax/polish is completely removed (splashing water - if the surface darkens, then the water repellency in
Hide