AUS Injection EV1F Injector Connector Review

Yes Fits your Jeep. Works well as an electrical connector. The electrical connector worked on my Jeep Wrangler YJ 2.5L 95

All four injectors were recently replaced. straight ahead and less than an hour to do so. After I finished (like a little anal) one of the connections (wire line) wasn't "tight enough". It was only necessary to learn, with a flat blade, to release the safety bar and move it a little. And ping! The D-ring just flew away and was never found. No, the dealer didn't have them (and they had to be ordered). They wanted $65 for a new braid. I got a deal from you guys and the D ring clip worked great…

The connector is ideal for EV1 and later EV6 Bosch injectors for 4.6L FORD engines ('92-'97). The metal wire retaining clip prevents the connector from becoming disconnected during injector testing and holds the connector securely in place when used as a replacement for a damaged connector. I used one (1) AUS connector to connect to the "All-Sun Auto Fuel Injector Tester" (Revain) while testing injector pulsing and leaking on V-8 engine injectors. The connection wires are color coded to match…

I have found that IMPROPER FUEL DELIVERY CAN CAUSE HEAT IN THE CYLINDERS, PISTONS (AND RINGS). I've researched which injector ports are the best and these are the best, I checked the fuel pressure - it was low, both fuel pumps weren't giving the injectors the correct pressure, they were also defective due to a blockage due to incorrect impedance - I replaced the regulator (Solder and heat shrink) all ends of the injector control cables - both the pump in the tank and the pump mounted on the…