Header banner
Revain logoHome Page
automatic step down regulating constant regulator logo

Automatic Step Down Regulating Constant Regulator Review

2

·

Very good

Revainrating 4.5 out of 5  
Rating 
4.3
🚪 Garage & Shop, 🔧 Automotive Tools & Equipment

View on AmazonView on ЯM

Media

(4)
img 1 attached to Automatic Step Down Regulating Constant Regulator
img 2 attached to Automatic Step Down Regulating Constant Regulator
img 3 attached to Automatic Step Down Regulating Constant Regulator
img 4 attached to Automatic Step Down Regulating Constant Regulator

Details

BrandKNACRO
Item Weight46 Grams
Output Voltage5 Volts

Description of Automatic Step Down Regulating Constant Regulator

LCD display input and output voltage, output current;Input anti-reverse protection, reverse will not burn;. Boost, can step-down, the output voltage 0.5-30V arbitrary regulation, the current limit 0-4A arbitrary regulation;. Output anti-intrusion, the battery charge without additional anti-reflux diode;. Button control output ON / OFF status, and can be set to power on the default ON or OFF;. The use of buck-boost chip as the main controller, external 60V 75A MOS tube as a switch, double 60V 5A SS56 Schottky rectification, 60V voltage value, superior to the market immature XL6009 / LM2577 program (a lot Device pressure value is not enough, MOS tube and Schottky diode pressure value must be greater than the input plus input voltage value);.

Reviews

Global ratings 2
  • 5
    1
  • 4
    0
  • 3
    1
  • 2
    0
  • 1
    0

Type of review

Revainrating 5 out of 5

Efficient Power Regulator for Garage Work

This power regulator is an excellent addition to any garage, as my tests showed it efficiently regulates voltage to prevent damage to tools and equipment .It is also compact and easy to use. The only con is that it may not be suitable for heavy-duty machinery in larger garages..

Pros
  • Efficient voltage regulation, compact design
Cons
  • May not be suitable for heavy-duty machinery

Revainrating 3 out of 5

DC current but can not withstand more than 2A

My block is doing its job, but around 2:00 this block gets insanely hot and shuts down, so hot it melts the glue left on it from the previous project. Definitely need a fan for higher voltage and current.

Pros
  • Using boost buck chip as main controller, external MOS tube 60V 75A as switch, 60V 5A SS56 double Schottky rectification, 60V rated voltage, superior to the immature market program XL6009 / LM2577 (many pressure value of the device is not enough, the pressure value of the MOS tube and Schottky diode must be greater than the input value plus input voltage);
Cons
  • There are problems