Enhanced OE Brake Kit: Power Stop KOE2302 Autospecialty Front Replacement Brake Kit with Premium Ceramic Brake Pads and OE Brake Rotors Review

Excellent value for money, fits like an OEM! NO problems during installation and 300 miles on new brake assemblies before writing this review.

Pads and rotors worked well. Clamps/pushers were rubbing on the rotors and making horrible noises. I ended up buying a set of AC Delco fasteners and going back and doing the job a second time with better parts.

Excellent value for money. Great quality, perfect fit. Shipping was FAST and arrived in perfect condition. EVERYTHING needed for the correct and complete replacement (in my case) of the front axle kit is included. As well as ceramic pads, because they do not "fade" under heavy braking conditions. Including brake pads and grease. Complete sentence.

Looks solid, good quality and works well. The instructions were ok but watching some youtube videos helped a lot e.g. B. Instructions for making a hook to reduce stress on the brake line. There were many fixatives out there, but none were exactly the same, so old ones were used that worked well. I feel like I should have built my own brakes years ago.

My Honda Pilot was shaking when braking. Upon investigation, it turned out that the front rotors were the likely culprit. This replacement kit was the whole package. The rotors and pads are included and the price is great. Replacing both front axles took about 3 hours. There is a break-in procedure for brake pads that must be followed, which is what I have done. The results are excellent. No more shaking. Very happy

They fit my Honda Pilot 04 perfectly. I had new Raybestos calipers so I used the new clips that came with them instead of the ones in this kit. The rotors seem fine after the first 1000 miles but I have more brake dust on my front wheels than my previous car with other pad types. I'll try that a little more, but maybe I'll switch to a different notebook. At the same time they are quiet, do not squeak like I have with other pads.

Some pads are ok, work at a good level. The situation is different with the rotors - they were installed and immediately there were strong pulsations in the brakes, similar to deformed rotors. I needed the car the next day so I went to the brake shop to have the rotors turned over so they could be brought up to speed as soon as possible. They couldn't do it - not only was the rotor out of spec at the braking surfaces, but the surface on the inside of the hub that attaches to the wheel hub was…