🚦 Blazer International B83: All-in-One Left Side Stop/Tail/Turn Light – 7 Functions for Optimal Performance Review

Actually I made a mistake so I replaced the other side. I haven't connected to it yet. I will update if there are problems.

Got this spare light I broke (my fault). Very similar to the one on the other side of the trailer. Installs very easily. Very happy.

The driver's side tail light on my trailer broke, this was an exact replacement, the mounting holes matched. the same quality as the original.

Bought as an add on for under two bucks I couldn't buy lightbulbs at that price. Even for $5, two screws, two wires, and you're back in business with a legally working trailer light/horn.

Easy to install, all you need is a nut remover (wrench will do), electrical tape and/or wire sleeves. 1) unscrew two nuts; 2) remove two wires; 3) Remove the old light; 4) install a new lamp to the trailer mount through the same holes the old one was removed from; 5) Replace nuts with bolts and tighten; 6) Connect (1) new tan wire to trailer brown wire and (1) new light yellow wire to trailer yellow wire - done! Your light should work and look like new, wait it's new. so I.

The light was intended to replace a broken lamp on the trailer. The new light fits perfectly into the mounting holes on the trailer. However, the original flashlight has SAE sized fasteners and this one has metric fasteners. It's okay, but for that you need to find different keys. Additionally, the included pigtails are too short to reach the trailer wiring, meaning new cables must be spliced to attach to the trailer wiring. In addition, the cable cross-section supplied with the new light is…