🚐 Camco White Wide Gutter Spout - Minimize Dirt & Black Streaks on Your RV, Simple Installation, Over 3-Inch Extension, Durable Design (4 Pack) Review

Clear instructions included. Because of the welded spacer where the screw holes were pre-drilled in the plate I had to drill 2 new holes. The parts are well made and should ensure my RV bumper cam can handle the extra weight of my kayak rack.

Like some others I have 3 lefts and only 1 right. I needed a left so it worked. The gutter itself was about 1/4" wider than my original extension but I was able to use some silicone to fill the gap. Would have given 5 stars but took one off due to the wrong quantity in the package.

A front drain on my 2016 Bounder is broken + the originals let the air conditioning through the side windows. They are wider than the originals but I managed to replace the ones I replaced. Now no more water drips on the side windows. This is a set of 4 so I will be replacing the other front spout with these. A bit of work to get them fit but they are worth it.

The way the instructions describe the installation doesn't work on my 2001 Trailite tt. You can't pull out the rubber seal to get to the screw, which I don't have either. I removed the caulk to attach the gutter and also filed the edge of the extension for a better fit. I used caulk around the edges to secure it in place, I may need to insert a self tapping screw. They protrude about an inch from the side walls.

I bought these to divert water from an existing gutter away from the bus. Normally this is probably an easy install, but my bus doesn't have a 'cover' or 'trim' to attach to the back. We have a 2014 Itasca Suncruiser with gutters glued to the side panel. There are no screws to loosen. I ended up creating a custom install for each. To install each one, I used a stainless steel screw, an external toothed washer, and silicone. It's perfect? No, but will do its job as intended.

The manhole extenders fit quite well and the instructions are clear and simple. In an ideal world, I would design the extension flange to fit the recessed gutter on the back of the gutter. Then the extension would fit more accurately and require less sealant. The only problem was applying the sealant. It's just sticky and hard to finish with a smooth surface. All in all the gutter extensions worked well and did what they were supposed to do. I recommend this product.

There were 3 left gutters and only 1 right one. So we have the right ones on the front of the bus. It wasn't easy to install on the 2007 Trek. I had to saw off the gutter flange that is on the cart and make a groove about 1/2 long for the gutter. I used 2 stainless steel screws for each gutter and screwed them into the roof through the gutter flange. I smeared the spout with silicone glue to prevent leakage. The spouts are exactly what I wanted to keep water from dripping through the passenger…

I have a 2017 Jayco Jay Flight SLX caravan and for some reason only one of the four corners had an extended chute preventing water from draining out. after rain on 3 of the 4 corners of my caravan. I purchased these four kits from Camco and the installation was very easy. I removed the 2 screws closest to the existing gutters to allow for some play in the gutter routing when I removed the old gutters. It takes some care to properly remove the existing caulk/sealant to ensure the new gutters fit