🔌 Cequent 707254 4-Way Flat 2ft Extension Alternative 3001 with Improved SEO Review

I recently bought a dual receiver for my hitch so I can use my bike rack and a small trailer. The bikes were causing interference so I added a 12" extension and my wiring was a bit short. The problem is solved.

work great, I deducted 1 star because 3 of the 4 wires are stuck together like tape and the white wire isn't stuck to the others which annoys me. for any reason. There may be a reason this is the case, but this is my review.

Just what I need to connect the pigtail on my pickup truck to the pigtail on my trailer. I just bought a truck and the pigtail on the truck was too short to reach the trailer without getting stuck in corners. This element perfectly bridged the gap, avoiding connecting any of the existing braids.

I was looking for one like this, wanted to make my own, when using a specific connection (ball joint) the trailer wiring is not long enough to reach the fork. It's perfect, I could make my own or expand on the lines of the pendant. The purchase was easier and faster.

If you are looking at this product and you own a Toyota truck you already know how wide the trailer harness connectors are. This is the ideal length for the route from the socket to the coupling. I tied a wire to each end and used a third longer tie to attach it to the left loop of the safety chain. Connector under the bumper cover. Looks factory!

The kit lacked a ground wire so only three of the required four wires were in the extension. When the trailer was physically hitched to the truck, all the lights worked correctly - most of the time - due to the ground path provided by the hitch. It took me a while to figure out that the floor wasn't installed at all. What's going on here, these people hired Microsoft quality engineers?

From time to time I rent out a cargo trailer with a relatively short headlight socket. The owner has a long hitch on the tractor so this is not a problem for him, but on my truck the connectors on the bracket are bolted to the bumper; the line on his trailer barely stretched and he pulled out in a sharp right turn. This extension is perfect, for just a few bucks, completely solves the problem without having to change any wiring on my truck or its trailer.