🔧 Universal Double-Cut Jig Profile T-Tracks with Pre-drilled Mounting Holes - CLEAR STYLE Woodworking Intersection Kit Review

Great value! Clear Style seems to have teamed up. Would give 5 stars in every category except not all pre-drilled holes were deep enough. The angles were perfect, the description matched and the diagram in the photos helped a lot. The strength is below because you can't use a #8 screw in them or they seem solid. My 5/16 holders from another company work great and they're not going anywhere with a tight fit in the router holes! I will definitely be buying from Clear Style again!

The T-track is about the same as any previous T-track I've bought apart from being black. Another difference: pre-drilled holes. Sinking holes is not enough. The pre-drilled holes in the guide are designed to fit an #8 screw. It's not like this. It didn't even fit a #6 screw until I drilled each hole with a countersink. I was then able to use 1/2 inch #6. PIA - but I didn't care because I had the beat. If not, be careful. Ps: I hope 1/2 #6 will hold (I didn't glue it) but it seems to be…

Do not attempt to use these rails with hex head screws. It won't work unless you redrill the holes or reshape the countersink. Works well with T-bolts. I can't tell if the countersink is badly formed or if it's just an angle not found in regular devices, but I couldn't find a screw that was flush enough to use hex head screws. In addition, they are too fragile for surface mounting. . With stiffer rails, you don't have to worry about bending the rails when surface mounting the rail. You must be…

These chains are exactly the same as Rockler and PowerTec but at half the price! As a bonus, you get a full crossover kit when you order 24" or 36" kits. I now have both Rockler and Clear Style T tracks in my bank, with two crossovers, and everything works fine! Install using #6 screws in a 3/4" x 3/8" tall slot. 1/4" hex head and 5/16" hex head T-bolts slide freely in the rail without snagging or pulling. the precision and precision of this already fine tuning! What great value for money! You…

The description says 'just perfectly finished' and that couldn't be further from the truth. The corners cut on them to form a four-way intersection are appalling at best. The first picture I added shows 2 pieces bumped at the corners and a third straight side to show the gap. On the 2nd picture you can see all 4 details and the distance between the cuts. It's not one that's far away, but all 4 are a bit out of the way. The third photo shows another set I bought. It's just a little, but it's…