Precision Mirror Engraving 🔍 and Cutting Machine by Cloudray Review

I ended up rebuilding the K40 and found that the original flex steel mounts were simply inadequate and I contributed to a number of issues, particularly when considering how to recalibrate the laser. So these fit the bill. For the head I printed a mount from Thingiverse (this was meant to replace the LightObject lens/mirror head, which worked great simply because it would have more room to adjust). The new laser head and mount (printed at 10% scaling, file disabled for some reason) fit together

This kit will NOT fit the K40 laser. I don't understand why this seller is not 100% transparent about this fact instead of leading the buyers to believe. Be prepared to disassemble about half of your car to install them and also prepare to go to the hardware store to buy a 14mm long M3. Screws to insert mirror #2 as there are no fasteners inside. Will this kit work, yes. Is it easy to do? Absolutely not. It takes drilling, crafting and a lot of preparation to get a mirror alignment where you…

Although marked as a K40 replacement on the Cloudray website, it does not fit directly. The first mirror mount is too high and will require a complete reinstallation of the laser tube to adjust to the new height. The second mount works well for a straight fit. The laser head requires a special mounting plate as it is longer and has a different diameter than the standard K40 head. The new head will also reduce Z depth by 10mm. Aside from the poor description of the K40 setup, the parts are well…