Cordless drill driver DeWALT DCD771C2 Review

Dewalt helped us renovate a two-room apartment. "I am supplementing my review - I have been using it for 5 years already, I took it apart once for the prevention of the gearbox" So far everything is ok.

Model DCD 771-ks A9A98 I bought for myself, the quality is satisfied. Everything is as expected, enough for my needs. There is a slight smell, not critical. You can take!

Sharing my unfiltered thoughts.There is the same model with 2A batteries included, take it or look for more expensive brushless options.

Let's begin the product review.DeWALT DCD771C2 BB657 Bought recently, so this review is subjective. I rate this screwdriver at 5- or 4+. I can recommend!

I watched videos in comparison with other brands except Hilty, Milwaky, and some others. Dewalt 18 brush is the most resistant and corresponds to the declared characteristics. Pros: I bought it from my hands on 10/20/22 brought from Finland for 8500 ! R. Batteries 2/ 1.3 . Ah included were produced at the beginning of covid 04/10/2022. Still keep excellent tried with Akk on ebay 5 a. H. (fake) the same working time drilled both a hole in the foam blocks 1.3 native against 5 with ebay ! The…

Bought for assembly line. Works flawlessly. several times fell on a concrete floor from a height of about a meter - no visible damage was found. Works powerfully.

The assembly level will definitely please you, in the second mode at maximum speed it can twist your wrist) With high-quality bits and drills, it screws, unscrews and drills almost anything. I am satisfied with the purchase.

Chose between DCD771 and DCD730. 730 is lighter, which is felt in direct comparison, while working, you don’t feel the weight of 771. Regarding the breakdown - I sin on the store . The service center refused to repair, indicating that extraneous sounds are not a defect - the cartridge works. The crunch disappears when the cartridge is fully tightened and then unscrewed. Not nice. Regarding the choice of 730 and 771: pluses 730 in a 30-minute charge, the price is 1.5 times higher. There are no

Model DCD771C2 E105B After a long search, selection, comparisons, this tool was chosen, the Screwdriver was very pleased, it fits perfectly in my hand, the weight is distributed perfectly, the hand does not get tired. Spins, drills, all with a bang. The case looks solid, there are no compartments for equipment, but there is for an additional battery, you can store equipment there. I was a little amused by the store's action: as a gift for a hammerless screwdriver, they gave impact bits.

Generally satisfied. See merits. We hope that we will get used to the weight, although if you work all day, it is better not to be too lazy and go to the special. shop and try everything for yourself. There was a choice: blue Bosch (the green one was before that, it broke, the cost of the gearbox was half the cost of such a new screwdriver) or Dewalt, they chose Dewalt, because Bosch has overpriced prices for the same characteristics, and their service is basically not needed, maybe a…

Long chose as doing repairs. For three years it has never let me down, a very powerful thing, if there are a lot of forces in the hands, then a good roofing cutter in a column with a wall of more than 3 mm twists. After 12 in the difference is very noticeable. Although a little heavy, but the hand does not get tired. Good things shouldn't weigh lightly. The plastic is very durable, dropped many times and only light scratches. The capacity is a bit small, but the charging speed covers all this…

I work in a furniture factory. The main tool is a screwdriver. I am very pleased with the tool. I ordered this time the next model DCD 791d2, with corrected backlight and lighter. Different pros: 1. Price. Ideal for a professional instrument. 2. Weight. For an 8 hour working day, the hands get a little tired, but you can work. (Before that, I used hitachi and interskol). 3. Ergonomics. Comfortable rubberized handle. The screwdriver is perfectly balanced. 4. Battery. Even after 2 years of use…

DeWALT DCD771C2 BC361 After the batteries of the previous screwdriver ran out, after talking with my comrades, I decided to buy a dewalt, and in general I did not regret it even once. I liked that the case, although not big, fits everything you need, and additional bits and drills, etc. Very decent torque, several times tore off the caps of self-tapping screws, moreover, not very small ones. Comfortable handle, compact, good weight distribution, the cartridge is very reliable. The case is…

At first I was guided by Hitachi DS10DAL, but thanks to the Market I found this model only a couple of thousand more expensive (I took it for 8,000, although the price in retail stores is ~ 10,000 thousand). I made a choice in favor of power and reliability (I really liked the professional hammer drill of the same brand, which a friend brought from work for repair, he also shared his experience with DeWALT screwdrivers). It's funny that the production is written on the batteries - Korea…

DeWALT DCD771C2 BB657 Bought recently, so this review is subjective. I rate this screwdriver at 5- or 4+. I can recommend!

before that, he worked with festulomi and DVT Chinese . when buying, I compared this model with the Bosch GSR1800 - the devices are from a different league, although the price is similar. steel gearbox, 13mm chuck. despite the fact that it is heavy due to the excellent balance, the hand does not get tired. rubberized handle. great backlight. there is no play in the gearbox. at 2nd speed drills better than a small corded drill small claims to the suitcase: there are 3 places for batteries…

I bought a little over a year ago, the choice was between him and Makita, but since Makita had already been tested in work, the choice fell on DeWalt. They work a lot of time: the hand gets used to the weight over time and it is not felt. At first, the backlight was annoying, but I got used to it, it's somehow not critical. I think it’s not worth talking about the case, it’s expensive for a house and a summer residence, of course, but for a small workshop or a garage it will do. During his

7B949 I bought in mid-August 2022 for 6800r, the batteries and the screwdriver itself were produced in May 2022, so the copy is fresh. I immediately bought a hook art. N086039 and a bit holder art. N095778 for ease of use (it cost about 650 for everything). Somehow I used it to make a roof at the dacha, unscrewed and screwed several hundred screws into a beam, showed itself perfectly, the battery never sat down to the end. I was looking for it with lithium batteries, so as not to bathe with…

I bought for 7399 at 220 Volts (at the moment the most inexpensive price for this model). Very satisfied. But, if I took it only for home, I would take 710D2 - very light and comfortable for a woman's hand. But for the village, 771 models are the most. Has pros: Powerful, good illumination, stable, very comfortable in the hand. Batteries fresh (May 2022) Cons: Psychologically, the battery capacity is too small. But so far there have been no long-term serious works, so I can’t confirm with work

In general, a high-quality machine copes with its tasks with batteries, although 1.3 Ah is enough for me; I drilled a safe for them to install an alarm; I drilled metal doors for sensors; a brick for installing devices; I passed them a wall in a log house. With its pros: solidly assembled device good quality plastic well balanced comfortable rubberized handle branded case with practical metal latches metal gearbox . Cons: awkward lighting in the case there are no stampings for drills and bits…