🚿 Chrome Slip-On Diverter Tub Spout Adapter by Delta Faucet - RP33794 Review

I replaced a Delta bath enema with a newer Delta bath enema that had different port requirements. While there are multiple installation options, I wasn't interested in welding or finding/using a set of small compression fittings to set it up properly. With this little gimmick, all I had to do was cut about an inch of the copper pipe coming out of the wall, slip it over the pipe, tighten it, and then screw on the tub spout. So quick, so easy, it's a shame Delta doesn't include this in its tub…

. I just wanted it to come with a faucet* and not just the adapter that came with it. My kids had to keep using our shower while I waited first for the diverter spout to be delivered and then the additional wait for that adapter. Easy installation, just a set screw and some teflon tape on the threads of the adapter. Insert 1/2" bare copper pipe, tighten set screw, screw diverter over adapter until flush with shower/tub wall. Done, no leaking, professional looking and great water pressure at…

This Delta RP33794 adapter is a bomb. Take a piece of plain 1/2" copper tubing and position it about 1/4" from the finished wall surface and pull You fasten it tightly with a set screw Outer and inner o-rings ensure a snug fit and prevent water from running back from the end Thoroughly clean the copper pipe and deburr the end of the pipe due to the inner o-ring a little plumbing grease (I use like Super Lube) onto the plug and gently slide the adapter onto the copper plug. DO NOT overtighten…