Dorman 741-586 Power Window Motor and Regulator Assembly - Front Driver Side - for Ford Models (OE FIX) - Black Review

Fits my 2007 Ford E150 perfectly and works as described. As with all of my purchases from Revain for this particular vehicle, I have yet to come across one that does not fit or perform as advertised. Well done Revan! As for the durability of this part, based on other parts I've purchased from Revain, I expect this one to hold up as well.

Very good product. There was a drop of sweat in 1 screw hole. I had to cut. The bottom screws are too long and protrude. This causes them to click the window slider when you fully open the window. I had to cut the screws about 1/4 inch to stick them out. The product seems very good. The worst part of this job is pulling out the rivets holding the original block in place. A bit of welding and the wrong screw size is why I gave it a -1 star.

I have a Ford e450, it took about a day to fit. The product was good quality but the motor was about half the size/weight of the original (expected for the price). Forget the instructions, this is a joke. I had to drill out the rivets to remove the old block which was a pain in the ass. Came with nuts and bolts which I used to replace some of the rivets. Be careful not to overtighten one of these if it has broken with minimal torque. I also had to use rivets on the bottom because the screw that

I have ordered two of these. No indication that it is a Dorman part. Dorman says it should have the Dorman logo, but it doesn't. Only one went in Dorman's box. Both also received a package of rivets and two nuts. If you check the part on Dorman's website, rivets and screws should be supplied so you don't need a dedicated rivet gun. Well, there are no nuts or bolts, so it's hardly a mistake. So your options are to go to the hardware store or buy a large riveting tool (the rivets that come with…

1/4" x 3/4" nuts and bolts with lock washers can be used in place of the rivets provided. both will work correctly. The window regulator is better quality than the original Ford. Tip: Remove the door speaker (4 screws and 1 quick release harness), this will help you remove the old device and install the new regulator. The hardest part of the job is removing the inner door panel and drilling out the old rivets. Another tip: before installing the door panel, make sure that everything works…