🔧 Dorman 800-153 Steel Fuel Line Repair Kit - 3/8 in. x 18 in. with 16mm Fitting: Enhance Fuel Line Repairs for Select Models Review

Bought two of these to replace the fuel filter on a 98 K1500. The truck has 119,000 miles and looked like the original filter. The nuts on the filter were rusted and I felt like I was going to break the pipes trying to remove the filter. I removed the line shape. The only lesson I learned was not to make the bend too close to the slide nut or it won't fit snugly on the fuel filter. Otherwise the lines worked great and the work went quickly. After I paint the details so the problem doesn't come…

Arrived well packaged however there is a slight "kink" in the line in the threaded area, where it might fit. into the fuel filter. about 1 inch in front of the sliding thread. This makes it impossible to fully unscrew the threaded nut so I can bend it to fit the Chevy Impala's line. Now I have to make the bend deeper than I actually wanted. It's not curved, but it's definitely not round, and the nut only goes about 1 inch before it hits the "bend." I'm disappointed. I won't be returning it as I

Extremely low quality product. First, there is no spring in the kit to bend the tube. The quality of the metal on the cord itself is pretty poor, I was amazed trying to bend it by hand and it flexed easily and kinked immediately. The 3/8 fuel line is almost impossible to bend by hand, cheap metal obviously. The line also has an annoying bulge near the nut that makes it impossible to shorten the line. The compression fitting that comes with it is rubbish too, I couldn't get mine to seal and when

Not sure why Amazon says it won't fit my car but it worked great to replace my rusted connections to my fuel filter. I had to replace the filter and hoses on both sides of the filter. used a small pipe cutter to remove the filter and lines from both sides. They did a great job bringing everything together. I used one inch wide, two foot long sandpaper with a cloth to clean the steel fuel line. 3/8 inch. You must be careful when ordering these kits as the line can be 3/8 but the fitting can be…