🔧 Dorman M39996 Brake Master Cylinder - Brand New Review

I used this new master cylinder in combination with a newer brake booster for a major upgrade to my brakes. now it stops again with oversized tires!

Works well. It looks like a "universal" clamp for a float switch. It's easy enough to remove the old clamp and reattach to this new part, as long as you leave a fair bit of wire attached to the old clamp.

I installed this valve on a 1985 Toyota pickup. It's much better than the factory one. Now it actually stops, which is surprising considering I'm spinning 33-inch off-road tires. I also installed an amp for a 1993 Toyota pickup which also made a huge difference. Just do yourself a favor if, like me, you upgrade yourself with a good flaring tool and your own new 316-inch brake line kit. I removed a lot of hardware and bent lines, so it was nice to have everything I needed on hand so I could make

Revain sets a new speed record! I checked and this item shipped 1-1/2 HOURS after I placed my order! Never seen such speed before. The low fluid level warning harness did not fit the truck wiring harness on my 1994 Toyota Pickup. I just removed the connector housing from the master cylinder wiring harness and connected the ends of the terminals to the truck wiring harness. Some tape and zip ties to keep the tape from unwinding finished the job. I removed the cover with the sensor from the tank,