Header banner
Revain logoHome Page
🌳 birch edge supply: 3/4" x 50' roll, preglued wood veneer edge banding | iron-on, hot melt adhesive | flexible wood tape | sanded to perfection | easy application | made in usa logo

🌳 Birch Edge Supply: 3/4" X 50' Roll, Preglued Wood Veneer Edge Banding | Iron-On, Hot Melt Adhesive | Flexible Wood Tape | Sanded to Perfection | Easy Application | Made in USA Review

5

Β·

Very good

Revainrating 4.5 out of 5Β Β 
RatingΒ 
4.4
🧱 Building Materials, 🧱 Building Supplies

View on AmazonView on Π―M

Media

(4)
img 1 attached to 🌳 Birch Edge Supply: 3/4" X 50' Roll, Preglued Wood Veneer Edge Banding | Iron-On, Hot Melt Adhesive | Flexible Wood Tape | Sanded to Perfection | Easy Application | Made in USA
img 2 attached to 🌳 Birch Edge Supply: 3/4" X 50' Roll, Preglued Wood Veneer Edge Banding | Iron-On, Hot Melt Adhesive | Flexible Wood Tape | Sanded to Perfection | Easy Application | Made in USA
img 3 attached to 🌳 Birch Edge Supply: 3/4" X 50' Roll, Preglued Wood Veneer Edge Banding | Iron-On, Hot Melt Adhesive | Flexible Wood Tape | Sanded to Perfection | Easy Application | Made in USA
img 4 attached to 🌳 Birch Edge Supply: 3/4" X 50' Roll, Preglued Wood Veneer Edge Banding | Iron-On, Hot Melt Adhesive | Flexible Wood Tape | Sanded to Perfection | Easy Application | Made in USA

Description of 🌳 Birch Edge Supply: 3/4" X 50' Roll, Preglued Wood Veneer Edge Banding | Iron-On, Hot Melt Adhesive | Flexible Wood Tape | Sanded to Perfection | Easy Application | Made in USA

EXTRA CLEAN "A" GRADE NATURAL WOOD VENEER EDGING – highest grade veneer quality pre-glued, birch wood veneer edging for repair or enhancing cabinetry, furniture, DIY projects, shelving, crafts and more. Finely sanded to perfection, this plywood edge banding provides a perfect finish to your projects. GERMAN PRE-GLUED HOT MELT ADHESIVE – pre-glued with top-quality, German hot melt adhesive, our veneer edge banding is super easy to apply with a household iron. The extra strong hot melt glue is evenly distributed on the veneer edging for a strong, permanent bond. SUPER EASY INSTALLATION – to apply this veneer edge banding, simply iron on to the surface with a regular household iron, hot air blower such as a hairdryer on high heat, or an edge banding machine if you have one in your toolkit. PREMIUM QUALITY REAL WOOD VENEER EDGING – this birch 3/4” X 50' iron-on veneer roll is all prepared ready for your application. Finely sanded to perfection, this plywood edge banding can be trimmed if required or lightly sanded down to fit. USE ON A VARIETY OF SURFACES – this roll of iron on edge banding can be stained or painted with a lacquer finish to match your project. Suitable for a wide variety of surfaces, this veneer edging is great when applied to wood, plywood, particle board, hardboard or metal.

Reviews

Global ratings 5
  • 5
    3
  • 4
    1
  • 3
    1
  • 2
    0
  • 1
    0

Type of review

Revainrating 3 out of 5

It's important to note that it's exactly 3/4 "

If you're going to use it to strap 3/4" plywood, it gets a little tight and you need to be careful what you're doing to keep him from moving. However, it will work. There are a lot of joints, but not excessively. Not sure there is an edge at this price point that doesn't have a lot of connections. If you paint, it doesn't matter. Also, a pair of flush-ended scissors costs an extra $20. It depends on the right tool for the right job. I did this with a razor blade, but even my best cuts were a…

Pros
  • Test for a year
Cons
  • Secret

Revainrating 5 out of 5

Too many compounds in the product but it works.

The only issue was the number of visible seams on the 25ft roll. So who has a whole roll with no splices? It's either bullshit or I've got all your splices. Our entire 25 foot roll had joints every 28 inches or less and we needed two 30 inch lengths. So we had to make cuts so that the junction was not angular and less noticeable. Easy to cut with scissors and secateurs. We cut corner pieces at a 45 degree angle using a blade and carpenter's square. Easy to apply with hot iron as shown on…

Pros
  • Sleek design
Cons
  • Some minor issues

Revainrating 5 out of 5

Beautiful thing, very sticky

I'm sure people say they don't stick. Maybe the tree wasn't prepared. My experience is that this works great. Heat the iron, place the strip, iron it, and then secure it to the surface with a block of wood. Sometimes at the very edge it doesn't stick the first time, but I go over it with a second pass, right after that with my little piece of wood, and it sticks really well. Trimming is pretty easy. I don't use the crop tool. Either a office knife or light passages with a plane. I'm sure a crop

Pros
  • Inspires confidence
Cons
  • You could have chosen a newer model

Revainrating 5 out of 5

Good Product / Repeat Customer

I've only edge banded a few times in the past and have recently started making a range of cabinets for my workshop so I've ordered a roll to test. As you can see from the photos it goes perfectly with the birch plywood I got from my local home center. I just ordered my third roll because it works so well. As for the seams, I just check them beforehand and carefully finish those areas to make sure my gloves don't ride over or catch on the edges of my pinky knuckles. After holding the freshly…

Pros
  • Impressive
Cons
  • Reliable

Revainrating 4 out of 5

That's great! suitable for building materials

I have been a beginner/intermediate carpenter for about a year and have always had problems with edges on plywood and MDF. As you may or may not know, it looks awful and doesn't lend itself well to grafting. I read about edge banding and decided to give it a try. I read many reviews complaining about glue, brittleness etc. I went with this brand which had decent reviews and I've learned to take the reviews with a grain of salt. I wish I had found this a year ago! Doesn't matter! Simply cut, run

Pros
  • price
Cons
  • update availability