🌳 Energy Suspension 4.2148G Performance Front Leaf Spring Bushing Kit Review

I installed them on a stock Ford Excursion 4WD. They really cleaned up the look. I highly recommend these bushes. The installation was a test of strength and will.

Didn't fit properly Damage was done but pressed in and I installed them at a leaf spring shop difficult to press because they are not rubber and will never be again. says it fits 2004 f350 4x4 but it doesn't.

Very well made for heavy use. Unfortunately it doesn't fit my 2002 F250 Super Duty, the smallest bushing didn't even come close, when I disassembled the truck I had to improvise by using a bench grinder to shorten the smallest bushing to size.

Removing the old leaf spring bushings wasn't easy. The trick to letting go of the old rubber is to pour a very small amount of gasoline around the edges. Wait for it to move in, then knock it out with a hammer and punch. DO NOT FORGET to lubricate new bushings before fitting!

I pressed the bushings onto Pro Comp 22210 sheet packs and replaced them with these. The rear suspension bushings are suitable, the front laminated core bushings are suitable. But for some reason the bushings for the back of the blade pack were too small. Not a big deal in my case as the leaf packs were new. Quality at the highest level Energy Suspension.

Purchased for my 2001 F 350 with 215,000 miles. The difference is phenomenal! This is the 3rd truck I've installed these bushings in and if you have a leaf spring front truck that has over 150,000 miles on it, it's in your best interest to switch to polyurethane bushings and you won't find a better one Find suppliers as Energy Suspension. Installation time is around 4 hours if you stick with it and HAVE THE RIGHT TOOLS FOR THE JOB! The bare minimum you will need are two bottle jacks, jacks or a