💰 FebSmart PCI-E Riser for Bitcoin Litecoin ETH Coin Mining with 6-PIN Power | PCIE Extension Cable GPU Riser for Ethereum Mining ETH | GPU Extension Cable PCIEX1 to PCIE X16 Extender VER006C | GPU Riser Pack of 6 Review

Works well. Make sure your GPU is connected to a PCIe cable and not a slot or you will run into problems. Finally found out that my GPU isn't actually broken but the card can't get enough power because it's only SATA power on the board. Apart from that it works fine.

I have no experience with similar products. But I can say that these risers gave me no problems with the included USB cables. I will definitely not use a SATA PCE adapter. but it works very well when you connect a 6-pin PCIE cable to it. The best part is that if your system supports so many GPUs, it works great with Mailiya's 4-in-1 GPU adapter.

I made a mining rig of 1060, 2x1080 and 1080 ti and it does not turn on. So when I was trying to figure out what to do I hooked up the 1060 to my main computer and it didn't recognize it at all so I tried one that didn't even come out of the anti-static packaging and it flickered and now none of the circuit boards turn on . Everything else has been tested and still works, it's just a phone bug and I'm 90% sure it was risers.

If you've ever built a mining farm, you know that risers are the weak link. Let's face it, it's all cheap Chinese junk. But this brand, which I've never tried before, is taking over. If I could rate it, I would give it 10 stars. While I would normally expect a bad board and a bad cable or two in a pack of 6 risers, in this pack I have 4 bad riser boards, a dodgy one that works when it wants to, 3 bad USB cables and 1 bad PCIe. Interface card x1. And it took me only two days of my life to…

I have built a 1060, 2x1080 and 1080 ti mining rig and it won't turn on. So when I was trying to figure out what to do I hooked up the 1060 to my main computer and it didn't recognize it at all so I tried one that didn't even come out of the anti-static packaging and it flickered and now none of the circuit boards turn on . Everything else has been tested and still works, it's just a phone bug and I'm 90% sure it was risers.

I know risers are notoriously random. I expect some to come. I had failed all 6, I came back and got a new set. Still nothing, all 6 substitutions failed. Half of them couldn't even send a message to the bios, the rest worked intermittently for several minutes, after which I had to reboot. I fixed my new mob because of course I can't be that lucky with 12 different risers. Bought another brand to try before sending it back and has been working for over a week now, no problems with the phone…

For heaven's sake, DO NOT BUY! My home was saved from a fire on the ground by a smoke detector less than 2 meters from my facility and the fact that I was home at the time! I powered the riser CORRECTLY from a 6-pin PCIe cable to a Parallel Miner HP 750w PSU. I watched TV. I heard a smoke detector go off. I rush to our finished basement and workshop wrapped in thick, acrid (burning plastic) smoke. I >>KNEW<< already that there was something wrong with these items (see image)…

I'm really amazed! In the years that I've consistently worked on everything using trial and error, I've never come across anything like this. In the first two hours of using these risers, I was already taking 2 aspirins for my headache and started drinking out of control! These gadgets will surely make you think about the true value of your life. After about 3 hours I managed to get 2 of my GPUs working! I felt a sudden surge of relief, but quickly shoved that feeling of satisfaction deep down…